LOADING IMAGES
APC Back-UPS 625VA
The Back-UPS 625 by APC protects your electronic equipment from damage due to power outages, surges and
spikes while providing short term battery power during an outage. The Back-UPS 625 features Automatic
Voltage Regulation (AVR), which instantly adjusts high and low voltages to safe levels for your electronics, so
you can work indefinitely through sustained fluctuations. Specifically designed to protect your equipment and
network connection in harsh power environments, the Back-UPS 625 ensures maximum productivity and work
efficiency
Battery Backup & Surge Protector for Electronics and Computers
Output power capacity: 325Watts / 625VA
Nominal Output Voltage: 230V
Nominal Input Voltage: 230V
Input Connections: IEC-320 C14
Cord Length: 1.22meters
Maximum Input Current: 3.0A
Audible alarms Provide notifications of changing utility power and UPS power conditions.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable Provides temporary battery power when the utility power is out.
Overload protection Safeguards the unit from damage by automatically turning it off in the event of a short circuit or overload.
Standard warranty 2 years
S$ 149.00(Excluding GST)S$ 174
14.37 %Off
The Back-UPS 625 by APC protects your electronic equipment from damage due to power outages, surges and
spikes while providing short term battery power during an outage. The Back-UPS 625 features Automatic
Voltage Regulation (AVR), which instantly adjusts high and low voltages to safe levels for your electronics, so
you can work indefinitely through sustained fluctuations. Specifically designed to protect your equipment and
network connection in harsh power environments, the Back-UPS 625 ensures maximum productivity and work
efficiency
Battery Backup & Surge Protector for Electronics and Computers
Output power capacity: 325Watts / 625VA
Nominal Output Voltage: 230V
Nominal Input Voltage: 230V
Input Connections: IEC-320 C14
Cord Length: 1.22meters
Maximum Input Current: 3.0A
Audible alarms Provide notifications of changing utility power and UPS power conditions.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable Provides temporary battery power when the utility power is out.
Overload protection Safeguards the unit from damage by automatically turning it off in the event of a short circuit or overload.
Standard warranty 2 years
APC Warranty
Warranty
The standard warranty is two (2) years from the date of purchase. Schneider
Electric IT (SEIT) standard procedure is to replace the original unit with a
factory-reconditioned unit. Customers who must have the original unit back due
to the assignment of asset tags and set depreciation schedules must declare such
a need at first contact with an SEIT Technical Support representative. SEIT will
ship the replacement unit once the defective unit has been received by the repair
department, or cross ship upon the receipt of a valid credit card number. The
customer pays for shipping the unit to SEIT. SEIT pays ground freight
transportation costs to ship the replacement unit to the customer.
Service If the unit requires service, do not return it to the dealer. Follow these steps: 1. Review the Troubleshooting section of the manual to eliminate common problems. 2. If the problem persists, contact Schneider Electric IT (SEIT) Customer Support through the APC by Schneider Electric Web site, www.apc.com. a. Note the model number and serial number and the date of purchase. The model and serial numbers are located on the rear panel of the unit and are available through the LCD display on select models. b. Call SEIT Customer Support and a technician will attempt to solve the problem over the phone. If this is not possible, the technician will issue a Returned Material Authorization Number (RMA#). c. If the unit is under warranty, the repairs are free. d. Service procedures and returns may vary internationally. Refer to the APC by Schneider Electric Web site for country specific instructions. 3. Pack the unit in the original packaging whenever possible to avoid damage in transit. Never use foam beads for packaging. Damage sustained in transit is not covered under warranty. 4. Always DISCONNECT THE UPS BATTERIES before shipping. The United States Department of Transportation (DOT), and the International Air Transport Association (IATA) regulations require that UPS batteries be disconnected before shipping. The internal batteries may remain in the UPS. 5. Write the RMA# provided by Customer Support on the outside of the package. 6. Return the unit by insured, pre-paid carrier to the address provided by Customer Support.
APC by Schneider Electric IT Customer Support Worldwide
For country-specific customer support, go to the APC by Schneider Electric
Web site, www.apc.com.
User manual - https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=AHUG-97RDHC_R0_...
Related Products